모든 제품
-
Mr. Wieslaw Alex아주 좋은 역삼투압 정수기입니다! 공급업체는 뛰어난 서비스와 기술 지원을 제공합니다. 완벽한 구매입니다! -
이스마일 하키 씨우리는 현재 첸젠 홍제와 프로젝트를 진행하고 있습니다. 우리는 의심의 여지없이 그들이 중국에서 나오는 최고의 수정 시스템을 제공한다고 말할 수 있습니다. 그들의 장비는 잘 설계되어 있습니다.신뢰성, 그리고 산업, 상업 또는 전문 애플리케이션에서 일관된 성능을 제공합니다.
-
제임스 와츠좋은 정수 회사입니다! 문제가 생길 때마다 항상 가장 빠른 해결책을 제시해 줍니다. 매우 전문적입니다.
10T/H Automatic Water Softening System with UV Sterilization and Iron Manganese Removal for Hotels
무료 샘플과 쿠폰을 받으려면 연락하세요.
whatsapp:0086 18588475571
위챗: 0086 18588475571
스카이프: sales10@aixton.com
걱정이 있으시면 24시간 온라인 서비스를 제공합니다.
x제품 상세 정보
| 용량 | 10t/h | 필터의 크기 | Ø1000×H1850 (40×72") |
|---|---|---|---|
| 필터 페인팅 색상 | 녹색, 파란색, 회색 옵션 | 필터 재료 | 탄소강 라이닝 |
| 핵심 구성요소 | 원수탱크, 원수부스터펌프, 필터, 유연제, 자외선살균기 | 어플리케이션 | 호텔 |
| 강조하다 | UV Sterilization Water Softening System,Iron Manganese Removal Water Softener,Automatic Control Softening Equipment |
||
제품 설명
I. Introduction to Automatic Water Softening System
The softening water treatment system is a water treatment equipment that uses the ion exchange principle to remove calcium and magnesium ions from water. It is mainly used in industrial boilers, cooling systems, chemical production and domestic water. Its core component is the sodium ion exchanger, which is filled with strong acid ion exchange resin. The sodium ions replace the calcium and magnesium ions to achieve water softening.
1.2 Project Name:Iron and manganese removal + softening + sterilization system
1.3 Raw water quality:Refer to the raw water quality report
1.4 System requirements:
1.4.1 System water output: 10m³/h;
1.4.2 Effluent water quality standards: meet international drinking water standards
1.4.3 Working mode: can be continuously run 24 hours a day, recommended working time is 8-12 hours/day;
1.5 Public resources:
1.5.1 Power supply: 380VAC/220VAC (50Hz);
1.5.2 Water source: local water source
II. Details of Product Description
| Specification | Description |
| Model | HJW-10T-ST |
| Flow rate | 10T/H |
| Inlet Water Hardness | ≤8 mmol/L |
| Outlet Water Hardness | ≤0.03 mmol/L |
| Working Pressure | 0.2-0.6 MPa |
| Working Temperature | 2-50℃ |
| Free Chlorine in Inlet Water | ≤0.3 mg/L |
| Suspended Solids in Inlet Water | <5 mg/L |
| Iron Content in Inlet Water | 0.3 mg/L |
III. Process flow and water volume configuration table
IV:Photo of Package
V:How to choose the model
First, you need to provide the type of system that needs to use softened water:
(1) Heating (2) Cooling water supply (3) Process water (4) Steam boiler (5) Iron and steel smelting industry (6) Chemical and pharmaceutical industry
2. System water use time: That is, operating time/hourly water consumption/average value/peak value/ Does the equipment need continuous water supply? If necessary, select the double-bed centralized control or double-control double-bed series, otherwise the single-valve single-tank series can be selected.
3. Total hardness of source water The water source is municipal tap watergroundwatersurface water source, and the total hardness of raw water in the use area. For a certain type of water softener, the raw water hardness is high, and its cycle water production must be relatively reduced, which leads to frequent regeneration of the soft water equipment. Relatively reduce the service life of the resin. To avoid such a situation, the resin volume should be increased, which means using a larger model of water softener.
4. Required soft water unit flow rate (tons/hour). This depends on the nature and requirements of the user's equipment; 5. Setting of cycle water production After the water softener model is set, according to the raw water hardness, the exchange working capacity of the resin used can determine the theoretical cycle water production (tons).