0.25-100T/Hour RO Pure Water Purification System For Laboratory Use

0.25-100T/Hour Two-Stage Reverse Osmosis Pure Water For Laboratory Use

I. Technology of  Two-stage reverse osmosis (RO)
Two-stage reverse osmosis (RO) achieves high-purity product water through "dual membrane separation stages + pH adjustment". It serves as the critical process bridging standard purified water and ultrapure water.
Its core value lies in addressing weak electrolyte removal—a challenge difficult for single-stage RO—while simultaneously enhancing water recovery rate through system design. In practical applications, investment versus operational costs must be weighed against water quality targets, and post-treatment processes must be incorporated to meet the stringent requirements of diverse industries.

II. Parameters

III. Product Parameter Information:

1:Water source: groundwater

2: product water use, industrial water,

3: water output. Single set of equipment 0.25-100T/H,

4:control mode: automatic control.

5:Adopted process: source water + four-stage pretreatment + primary RO reverse osmosis + secondary RO reverse osmosis + post-treatment process

IV. Here is a guideline for you to get a proper quotation
Tell us the raw water/source of water(tap water, well water, or sea water, etc)
Provide water analysis report(TDS , conductivity, or resistivity, etc)
Required production capacity( 5m³/H, 50m³/H,or 500m³/H, etc)
What's the pure water used for( industrial,Food and Beverage,or agriculture, etc )

Photoes: