15m³/H Industrial Wastewater Filtration System for Textile Dyeing
무료 샘플과 쿠폰을 받으려면 연락하세요.
whatsapp:0086 18588475571
위챗: 0086 18588475571
스카이프: sales10@aixton.com
걱정이 있으시면 24시간 온라인 서비스를 제공합니다.
x제품 상세 정보
| 용량 | 15m³/h | 재료 | 316 L, PP, UPVC, PVDF, FRP |
|---|---|---|---|
| TDS | <2000 mg/l | 대구 | 1000-15000 mg/l |
| ph | 6-9 | HS 코드 | 84212199 |
| 강조하다 | 15m³/H industrial wastewater filter,textile dyeing filtration system,industrial water filtration equipment |
||
필요한 제품을 선택하고 게시판에서 당사와 소통 할 수 있습니다.
제품 설명
I.Overview
Textile/printing and dyeing industry wastewater has high color, high COD, difficult to degrade organic matter (such as dyestuffs, auxiliaries), high salinity (such as desizing wastewater) and heavy metals (such as mordant), etc., and the treatment needs to be combined with physicochemical and biochemical technologies, and according to the type of dyestuffs and auxiliaries, the composition of the reuse of the demand for a flexible combination of processes, and the selection of corrosion-resistant, oxidation-resistant materials in order to cope with the complexity of the water quality.
II.Main process
Pre-treatment → Physical treatment (for difficult to degrade substances)→ Biological treatment → Deep treatment and reuse → Sludge treatment
III.Equipment Material Selection
| Processing Stage | Equipment | Material Selection | |||||
| Pretreatment Stage | Grille/Screen | 316 stainless steel (corrosion-resistant) | |||||
| Coagulation Reaction Tank | PP (polypropylene) or FRP (fiberglass-reinforced plastic), resistant to acids, alkalis and chemical corrosion | ||||||
| Dissolved Air Flotation Equipment | Main body: SS304; Dissolved air tank: carbon steel with rubber lining | ||||||
| Physicochemical Treatment Stage | Fenton Reactor | Titanium or HDPE lining (resistant to strong oxidization) | |||||
| Ozone Generator | 316L stainless steel (oxidation-resistant) | ||||||
| Activated Carbon Filter | Carbon steel lined with epoxy resin or UPVC | ||||||
| Biological Treatment Stage | Anaerobic Reactor (UASB) | Carbon steel lined with fiberglass-reinforced plastic or PP material | |||||
| MBR Membrane Module | PVDF membrane + stainless steel support (pollution-resistant) | ||||||
| Aeration System | EPDM aeration pipe + UPVC pipeline | ||||||
| Advanced Treatment Stage | RO Membrane Housing | FRP or SS316; Membrane element: polyamide composite membrane | |||||
| Electrochemical Equipment | Titanium electrode (corrosion-resistant) | ||||||
| Sludge Treatment Stage | Dewatering Machine | Centrifuge: duplex stainless steel; Plate and frame filter press: PP filter plate | |||||
IV.Core Attribute Parameters
| Parameter | Typical Range/Requirement | Significance | ||||||
| COD | 1000 - 15000 mg/L | Determines the selection of oxidation or biochemical processes | ||||||
| Chroma | 500 - 5000 times (dilution multiple) | Requires physical and chemical decolorization (coagulation, oxidation, adsorption) | ||||||
| pH | 6 - 9 (suitable range for biological treatment) | Strong acid/alkali wastewater requires neutralization pretreatment | ||||||
| Salt Content (TDS) | < 2000 mg/L (reuse requirement) | High - salt wastewater requires membrane treatment or evaporation concentration | ||||||
| BOD5/COD | < 0.3 (requires hydrolysis and acidification enhancement) | Evaluates the biodegradability of wastewater | ||||||
| Heavy Metals (Cr, Cu) | < 0.5 mg/L (discharge standard) | Requires chemical precipitation or electrochemical treatment | ||||||
V.Typical application scenarios
Cotton printing and dyeing
Chemical fiber printing and dyeing
Denim dyeing (indigo wastewater)
Printing wastewater
VI.Here is a guideline for you to get a proper quotation
Tell us the raw water/source of water(tap water, well water, or sea water, etc)
Provide water analysis report(TDS , conductivity, or resistivity, etc)
Required production capacity( 5m³/H, 50m³/H,or 500m³/H, etc)
What's the pure water used for( industrial,Food and Beverage,or agriculture, etc )
