SS304 Wastewater Treatment System 10t/h for Food Beverage Industry
무료 샘플과 쿠폰을 받으려면 연락하세요.
whatsapp:0086 18588475571
위챗: 0086 18588475571
스카이프: sales10@aixton.com
걱정이 있으시면 24시간 온라인 서비스를 제공합니다.
x제품 상세 정보
| Capacity | 10t/h(Customizable) | Grille/Screen/DAF Material | sus304 |
|---|---|---|---|
| Ozone Generator/Centrifugal Dewatering Machine Material | SS316L | Equalization Tank Material | PP/FRP |
| MBR Membrane Module | PVDF | Warranty | 2-Year |
| HS code | 84212199 | After service | 24/7 online support |
| 강조하다 | SS304 wastewater treatment system,10t/h wastewater treatment system,food beverage industry wastewater system |
||
제품 설명
I.Overview
Wastewater treatment systems for the food and beverage industry need to be designed for characteristics such as high organic concentrations, suspended solids, oils and greases, and possible additives.
II.Main process
Raw water → Pre-treatment (physical separation + water conditioning) → Biological treatment (core: anaerobic + aerobic / contact oxidation combination / single selection) → Deep treatment (difficult to degrade + SS + microorganisms precise removal) → Compliant effluent
(simultaneous sludge generation goes in) Sludge treatment (reduction + resourcefulness) → Resourcefulness / Disposal
III.Core Property Parameters
| Parameter | Typical Range/Requirement | Significance | ||||||
| COD | 1000-10000 mg/L (Raw Water) | Determines the selection of biological treatment processes | ||||||
| BOD₅/COD Ratio | ≥0.3 (Favorable for biodegradation) | Assesses the biodegradability of wastewater | ||||||
| SS (Suspended Solids) | 200-2000 mg/L | Influences the selection of pretreatment equipment | ||||||
| pH | 6-9 (After Treatment) | Avoids corrosion or inhibition of microbial activity | ||||||
| Oil Content | < 50 mg/L (Discharge Requirement) | Requires air flotation or centrifugal separation | ||||||
| Ammonia Nitrogen (NH₃-N) | < 15 mg/L (Discharge Standard) | Requires nitrification/denitrification processes | ||||||
| Sludge Loading (F/M) | 0.1-0.4 kgBOD₅/kgMLSS·d | Controls the operation efficiency of activated sludge systems | ||||||
IV.Equipment Material Selection
| Section | Equipment | Material Description | ||||||
| Pretreatment | Grille/Screen | 304 stainless steel (corrosion-resistant); Nylon (flexible screen) | ||||||
| Equalization Tank | Concrete + epoxy resin anti-corrosion; or PP (polypropylene)/FRP (fiber-reinforced plastic) | |||||||
| DAF (Dissolved Air Flotation) Equipment | Main body: SS304; Dissolved air tank: Carbon steel with rubber lining; Releaser: PP material | |||||||
| Biological Treatment | Anaerobic Reactor (UASB/IC) | Carbon steel with FRP lining (anti-corrosion); or full stainless steel | ||||||
| Aerobic Tank | Concrete + anti-corrosion coating (e.g., polyurea); Aeration pipes: UPVC or EPDM | |||||||
| MBR Membrane Module | PVDF (polyvinylidene fluoride) membrane + stainless steel support | |||||||
| Advanced Treatment | Ozone Generator | 316L stainless steel (oxidation-resistant) | ||||||
| Activated Carbon Filter | Carbon steel with rubber lining; or FRP (fiber-reinforced plastic) | |||||||
| Sludge Treatment | Centrifugal Dewatering Machine | Parts in contact with sludge: SS316 or duplex stainless steel | ||||||
| Pipes and Valves | UPVC; or fluorine-lined material (corrosion-resistant, anti-clogging) | |||||||
V.Typical application scenarios
Brewing industry (beer, liquor)
Dairy processing
Juice/beverage production
Meat processing
VI.Here is a guideline for you to get a proper quotation
Tell us the raw water/source of water(tap water, well water, or sea water, etc)
Provide water analysis report(TDS , conductivity, or resistivity, etc)
Required production capacity( 5m³/H, 50m³/H,or 500m³/H, etc)
What's the pure water used for( industrial,Food and Beverage,or agriculture, etc )
